Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-00-156-2752 5306001562752 |
| TXT | Description: | Clevis Bolt |
| INC | Item Name Code: | 06662 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | 0.562 inches |
| AASB | Fastener Length: | 3.562 inches |
| AASK | Head Style: | Button |
| AASL | Head Diameter: | 1.312 inches |
| AASU | Head Height: | 0.375 inches |
| AAVZ | Groove Diameter: | 0.660 inches |
| AAWB | Shank Unthreaded Hole Diameter: | 0.141 inches first hole and 0.151 inches first hole |
| AAWU | Single Shear Strength: | 33150 pounds per square inch |
| ABQZ | Internal Drive Style: | Slot |
| AHYM | Thread Diameter: | 0.750 inches |
| CMLP | Thready Qty Per Inch (tpi): | 16 |
| CQBC | Min. Tensile Strength (psi): | 125000 pounds per square inch |
| CQFM | Hardness Rating: | 26.0 rockwell c and 32.0 rockwell c |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center: | 3.375 inches first hole |
| MATT | Material: | Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 |
| MDCL | Material Specification: | Mil-b-6812 military specification all material responses |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| THSD | Thread Series Designator: | Unf |
| ZZZW | Departure From Cited Document: | Thread t per mil-s-7742 except major diameter is not to exceed maximum allow shank bolt dia |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
