Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-335-2906 5306013352906 |
| TXT | Description: | Close Tolerance Bolt |
| INC | Item Name Code: | 27851 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | 0.666 inches |
| AASB | Fastener Length: | Between 1.221 inches and 1.251 inches |
| AASK | Head Style: | Spline extended washer |
| AASU | Head Height: | Between 0.327 inches and 0.347 inches |
| AATC | Extended Washer Diameter: | 0.696 inches |
| AATD | Extended Washer Thickness: | Between 0.044 inches and 0.064 inches |
| AAUB | Hole Diameter: | Between 0.050 inches and 0.060 inches |
| AAUR | Grip Diameter: | Between 0.3735 inches and 0.3745 inches |
| AAZH | Head Minor Diameter: | Between 0.423 inches and 0.438 inches |
| AGAV | End Application: | Pacer dawn |
| AHYM | Thread Diameter: | 0.3750 inches |
| ANEE | Grip Length: | Between 0.552 inches and 0.572 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 24 |
| CQFM | Hardness Rating: | 46.0 rockwell c and 50.0 rockwell c |
| CRHC | Hole Configuration Style: | Spline |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel |
| MDCL | Material Specification: | Ams 6487 assn standard single material response |
| SFTT | Surface Treatment: | Cadmium |
| STDC | Surface Treatment Specification: | Mil-c-8837, type ii, class 2 military specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
