Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5305-01-023-9722 5305010239722 |
| TXT | Description: | Close Tolerance Screw |
| INC | Item Name Code: | 29294 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.402 inches and 0.438 inches |
| AASB | Fastener Length: | Between 1.668 inches and 1.688 inches |
| AASK | Head Style: | Flat countersunk |
| AASL | Head Diameter: | Between 0.449 inches and 0.507 inches |
| AAUR | Grip Diameter: | Between 0.2487 inches and 0.2492 inches |
| AAWB | Shank Unthreaded Hole Diameter: | 0.076 inches first hole and 0.086 inches first hole |
| ABQZ | Internal Drive Style: | High-torque |
| AHYM | Thread Diameter: | 0.250 inches |
| ANEE | Grip Length: | Between 1.250 inches and 1.266 inches |
| CMLP | Thready Qty Per Inch (tpi): | 28 |
| CQBC | Min. Tensile Strength (psi): | 90000 pounds per square inch |
| CQHQ | Minimum Yield Strength: | 63000 pounds per square inch |
| CRSQ | Countersink Angle: | 100.0 degrees |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center: | 1.583 inches first hole and 1.599 inches first hole |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| FEAT | Special Features: | Plunger operated spring loaded retaining balls in threads |
| MATT | Material: | Iron alloy 660 |
| SFTT | Surface Treatment: | Passivate |
| STDC | Surface Treatment Specification: | Qq-p-35 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
