Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5305-01-043-5740 5305010435740 |
| TXT | Description: | Close Tolerance Screw |
| INC | Item Name Code: | 29294 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.277 inches and 0.328 inches |
| AASB | Fastener Length: | Between 4.606 inches and 4.626 inches |
| AASK | Head Style: | Crowned hexagon |
| AASU | Head Height: | Between 0.126 inches and 0.141 inches |
| AATB | Width Between Flats: | Between 0.430 inches and 0.439 inches |
| AAUR | Grip Diameter: | Between 0.2487 inches and 0.2492 inches |
| AAWB | Shank Unthreaded Hole Diameter: | 0.076 inches first hole and 0.086 inches first hole |
| ABQZ | Internal Drive Style: | Slot |
| AHYM | Thread Diameter: | 0.250 inches |
| ANEE | Grip Length: | Between 4.188 inches and 4.203 inches |
| CMLP | Thready Qty Per Inch (tpi): | 28 |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center: | 4.511 inches first hole and 4.531 inches first hole |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp xm-13 |
| MDCL | Material Specification: | Ams 5629 assn standard single material response |
| SFTT | Surface Treatment: | Passivate |
| STDC | Surface Treatment Specification: | Qq-p-35 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
