Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5305-01-159-5732 5305011595732 |
| TXT | Description: | Close Tolerance Screw |
| INC | Item Name Code: | 29294 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.305 inches and 0.356 inches |
| AASB | Fastener Length: | Between 5.165 inches and 5.185 inches |
| AASK | Head Style: | Crowned hexagon |
| AASU | Head Height: | Between 0.157 inches and 0.172 inches |
| AATB | Width Between Flats: | Between 0.492 inches and 0.502 inches |
| AAUM | Locking Feature: | Detent ball grip |
| AAUR | Grip Diameter: | Between 0.3112 inches and 0.3117 inches |
| AAWB | Shank Unthreaded Hole Diameter: | 0.076 inches first hole and 0.086 inches first hole |
| ABQZ | Internal Drive Style: | Slot |
| AHYM | Thread Diameter: | 0.312 inches |
| ANEE | Grip Length: | Between 4.688 inches and 4.704 inches |
| CMLP | Thready Qty Per Inch (tpi): | 24 |
| CQBC | Min. Tensile Strength (psi): | 90000 pounds per square inch |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center: | 5.053 inches first hole and 5.073 inches first hole |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp xm-13 |
| MDCL | Material Specification: | Ams 5629 assn standard single material response |
| SFTT | Surface Treatment: | Passivate |
| STDC | Surface Treatment Specification: | Qq-p-35 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
