Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5305-01-186-3103 5305011863103 |
| TXT | Description: | Close Tolerance Screw |
| INC | Item Name Code: | 29294 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.262 inches and 0.313 inches |
| AASB | Fastener Length: | Between 1.747 inches and 1.767 inches |
| AASK | Head Style: | Crowned hexagon |
| AASU | Head Height: | Between 0.095 inches and 0.110 inches |
| AATB | Width Between Flats: | Between 0.367 inches and 0.376 inches |
| AAUM | Locking Feature: | Detent ball grip |
| AAUR | Grip Diameter: | Between 0.1889 inches and 0.1894 inches |
| AAWB | Shank Unthreaded Hole Diameter: | 0.070 inches first hole and 0.080 inches first hole |
| ABQZ | Internal Drive Style: | Slot |
| AHYM | Thread Diameter: | 0.190 inches |
| ANEE | Grip Length: | Between 1.375 inches and 1.391 inches |
| CMLP | Thready Qty Per Inch (tpi): | 32 |
| CQBC | Min. Tensile Strength (psi): | 63000 pounds per square inch |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center: | 1.658 inches first hole and 1.678 inches first hole |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp xm-13 |
| MDCL | Material Specification: | Ams5629 assn standard single material response |
| SFTT | Surface Treatment: | Passivate |
| STDC | Surface Treatment Specification: | Qq-p-35 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
