Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5310-00-060-2039 5310000602039 |
| TXT | Description: | Hexagon Self-locking Nut |
| INC | Item Name Code: | 05277 |
| AAJD | Thread Class: | 3b |
| AAJF | Thread Direction: | Right-hand |
| AAUM | Locking Feature: | Prevailing torque with nonmetallic insert |
| ABAJ | Lubrication: | Soluble lubricant |
| ACTA | Nut Style: | Hexagon |
| ADEA | Nut Height: | Between 0.219 inches and 0.281 inches |
| ASDB | Width Across Flats: | Between 0.336 inches and 0.345 inches |
| AZKQ | Tempurature Rating: | 250.0 degrees fahrenheit |
| BZRR | Thread Series: | Unjc |
| CMLP | Thready Qty Per Inch (tpi): | 32 |
| CQJX | Thread Size: | 0.164 inches |
| CRSQ | Countersink Angle: | 88.0 degrees nut |
| CRTM | Bearing Surface Type: | Chamfered or washer faced |
| CSXL | Bearing Surface Finish: | 125.0 microinches |
| MATT | Material: | Aluminum alloy 2014 nut or aluminum alloy 2017 nut or aluminum alloy 2024 nut or aluminum alloy 7075 nut |
| MDCL | Material Specification: | Qq-a-200/2, t6 federal specification 1st material response nut or qq-a-225/5, t4 federal specification 2nd material response nut or qq-a-225/6, t6 federal specification 3rd material response nut or qq-a-200/11, t6 federal specification 4th material response nut |
| SFTT | Surface Treatment: | Anodize except insert or chromate except insert |
| STDC | Surface Treatment Specification: | Mil-a-8625 military specification 1st treatment response except insert |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote