Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5310-00-574-0221 5310005740221 |
| TXT | Description: | Hexagon Self-locking Nut |
| INC | Item Name Code: | 05277 |
| AAJD | Thread Class: | 3b |
| AAJF | Thread Direction: | Right-hand |
| AAUM | Locking Feature: | Prevailing torque with nonmetallic insert |
| ACTA | Nut Style: | Hexagon |
| ADEA | Nut Height: | Between 0.855 inches and 0.891 inches |
| ASDB | Width Across Flats: | Between 1.052 inches and 1.068 inches |
| AZKQ | Tempurature Rating: | 250.0 degrees fahrenheit |
| BZRR | Thread Series: | Unf |
| CMLP | Thready Qty Per Inch (tpi): | 16 |
| CQJX | Thread Size: | 0.750 inches |
| CRSQ | Countersink Angle: | 88.0 degrees nut |
| CRTM | Bearing Surface Type: | Chamfered or washer faced |
| CSXL | Bearing Surface Finish: | 125.0 microinches |
| MATT | Material: | Nickel alloy 400 nut or nickel alloy r-405 nut |
| MATT | Material: | Plastic polyhexamethylene amide locking insert |
| MDCL | Material Specification: | Astm d4066, comp a, type 1 assn standard single material response locking insert |
| SPCL | Special Test Features: | Special quality control testing |
| TEST | Test Data Document: | 81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", ", etc.). |
| ZZZX | Departure From Cited Designator: | As modified by material which must conform to ships parts control center special quality control provisions |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
