Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-013-5719 5306010135719 |
| TXT | Description: | Internal Wrenching Bolt |
| INC | Item Name Code: | 06666 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 2.360 inches and 3.120 inches |
| AASB | Fastener Length: | Between 4.360 inches and 4.500 inches |
| AASK | Head Style: | Flat chamfer |
| AASL | Head Diameter: | Between 1.479 inches and 1.500 inches |
| AASU | Head Height: | Between 0.988 inches and 1.000 inches |
| AAUB | Hole Diameter: | 0.094 inches |
| ABQZ | Internal Drive Style: | Hexagon |
| AHYM | Thread Diameter: | 1.000 inches |
| ASDB | Width Across Flats: | Between 0.750 inches and 0.757 inches |
| ASXK | Hole Quantity: | 6 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 8 |
| CQBC | Min. Tensile Strength (psi): | 170000 pounds per square inch |
| CQFM | Hardness Rating: | 38.0 rockwell c and 45.0 rockwell c |
| CQHQ | Minimum Yield Strength: | 150000 pounds per square inch |
| CRHC | Hole Configuration Style: | Round longitudinal hole |
| MATT | Material: | Steel |
| SFTT | Surface Treatment: | Cadmium and chromate |
| SPCL | Special Test Features: | Special quality control testing |
| STDC | Surface Treatment Specification: | Qq-p-416, type 2, class 3 federal specification all treatment responses |
| TEST | Test Data Document: | 81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", ", etc.). |
| THSD | Thread Series Designator: | Unc |
| ZZZT | Specification Or Standard: | 6 type |
| ZZZX | Departure From Cited Designator: | As mod by material which must conform to ships parts control center special quality control provisions |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
