Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5310-00-728-5512 5310007285512 |
| TXT | Description: | Plate Self-locking Nut |
| INC | Item Name Code: | 05280 |
| AAJD | Thread Class: | 3b |
| AAJF | Thread Direction: | Right-hand |
| AAUM | Locking Feature: | Prevailing torque with nonmetallic insert |
| ABTB | Mounting Hole Diameter: | Between 0.098 inches and 0.103 inches |
| ACTA | Nut Style: | Plate |
| ACVN | Nut Length: | 1.296 inches |
| ADEA | Nut Height: | Between 0.240 inches and 0.375 inches |
| ADEB | Plate Thickness: | 0.075 inches |
| ADEC | Plate Width: | Between 0.484 inches and 0.516 inches |
| ADFP | Nut Mounting Provision: | Countersunk holes |
| ADFR | Mounting Provision Location: | Opposite nut projection side |
| ADFU | Mounting Hole Arrangement Style: | 2 holes |
| ADFW | Distance From Aperture Center To Mounting Hole Center: | Between 0.495 inches and 0.505 inches |
| ADFY | Center To Center Distance Between Mounting Holes Along Length: | Between 0.998 inches and 1.002 inches |
| AZKQ | Tempurature Rating: | 250.0 degrees fahrenheit |
| BZRR | Thread Series: | Unjf |
| CMLP | Thready Qty Per Inch (tpi): | 28 |
| CQFM | Hardness Rating: | 32.0 rockwell c |
| CQJX | Thread Size: | 0.250 inches |
| CSSM | Mounting Hole Countersink Angle: | Between 98.0 degrees and 102.0 degrees |
| MATT | Material: | Plastic polyamide locking insert |
| MATT | Material: | Steel nut |
| SFTT | Surface Treatment: | Cadmium except insert and chromate except insert |
| STDC | Surface Treatment Specification: | Qq-p-416, type 2, class 3 federal specification single treatment response except insert |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
