Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-119-1406 5306011191406 |
| TXT | Description: | Shear Bolt |
| INC | Item Name Code: | 15903 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.397 inches and 0.447 inches |
| AASB | Fastener Length: | Between 0.595 inches and 0.625 inches |
| AASK | Head Style: | Spline extended washer |
| AASU | Head Height: | Between 0.173 inches and 0.183 inches |
| AATC | Extended Washer Diameter: | Between 0.349 inches and 0.359 inches |
| AATD | Extended Washer Thickness: | Between 0.012 inches and 0.022 inches |
| AAUB | Hole Diameter: | Between 0.032 inches and 0.042 inches |
| AAUR | Grip Diameter: | Between 0.1885 inches and 0.1895 inches |
| AAZH | Head Minor Diameter: | Between 0.253 inches and 0.259 inches |
| AHYM | Thread Diameter: | 0.190 inches |
| ANEE | Grip Length: | Between 0.178 inches and 0.198 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 32 |
| CQBC | Min. Tensile Strength (psi): | 220000 pounds per square inch |
| CQFM | Hardness Rating: | 46.0 rockwell c and 50.0 rockwell c |
| CRHC | Hole Configuration Style: | Spline |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp h11 |
| MDCL | Material Specification: | Ams6487 assn standard single material response |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Mil-c-8837, type 2, class 2 military specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
