Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-133-7195 5306011337195 |
| TXT | Description: | Shear Bolt |
| INC | Item Name Code: | 15903 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.579 inches and 0.619 inches |
| AASB | Fastener Length: | Between 2.589 inches and 2.609 inches |
| AASK | Head Style: | Double hexagon w/hole |
| AASU | Head Height: | Between 0.338 inches and 0.358 inches |
| AATB | Width Between Flats: | Between 0.365 inches and 0.385 inches |
| AATC | Extended Washer Diameter: | Between 0.521 inches and 0.531 inches |
| AATD | Extended Washer Thickness: | Between 0.072 inches and 0.092 inches |
| AAUB | Hole Diameter: | Between 0.060 inches and 0.080 inches |
| AAUR | Grip Diameter: | Between 0.3110 inches and 0.3120 inches |
| AHYM | Thread Diameter: | 0.312 inches |
| ANEE | Grip Length: | Between 1.990 inches and 2.010 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 24 |
| CQBC | Min. Tensile Strength (psi): | 180000 pounds per square inch |
| CQFM | Hardness Rating: | 39.0 rockwell c and 43.0 rockwell c |
| CRHC | Hole Configuration Style: | Double hexagon longitudinal hole |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Qq-p-416, ty2, cl2 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
