Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-263-9994 5306012639994 |
| TXT | Description: | Shear Bolt |
| INC | Item Name Code: | 15903 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 1.579 inches and 1.619 inches |
| AASB | Fastener Length: | Between 2.089 inches and 2.109 inches |
| AASK | Head Style: | Double hexagon extended washer |
| AASU | Head Height: | Between 0.256 inches and 0.276 inches |
| AATB | Width Between Flats: | Between 0.363 inches and 0.383 inches |
| AATC | Extended Washer Diameter: | Between 0.521 inches and 0.531 inches |
| AATD | Extended Washer Thickness: | Between 0.072 inches and 0.092 inches |
| AAUB | Hole Diameter: | Between 0.050 inches and 0.060 inches |
| AAUR | Grip Diameter: | Between 0.311 inches and 0.312 inches |
| AHYM | Thread Diameter: | 0.312 inches |
| ANEE | Grip Length: | Between 1.490 inches and 1.510 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 24 |
| CQBC | Min. Tensile Strength (psi): | 180000 pounds per square inch |
| CQFM | Hardness Rating: | 39.0 rockwell c and 43.0 rockwell c |
| CRHC | Hole Configuration Style: | Double hexagon flats |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Qq-p-416, type 2, class 2 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
