Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-275-3273 5306012753273 |
| TXT | Description: | Shear Bolt |
| INC | Item Name Code: | 15903 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 0.445 inches and 0.495 inches |
| AASB | Fastener Length: | Between 1.080 inches and 1.110 inches |
| AASK | Head Style: | Spline extended washer |
| AASU | Head Height: | Between 0.240 inches and 0.260 inches |
| AATC | Extended Washer Diameter: | Between 0.460 inches and 0.470 inches |
| AATD | Extended Washer Thickness: | Between 0.026 inches and 0.046 inches |
| AAUB | Hole Diameter: | Between 0.032 inches and 0.042 inches |
| AAUR | Grip Diameter: | Between 0.2485 inches and 0.2495 inches |
| AAZH | Head Minor Diameter: | Between 0.318 inches and 0.324 inches |
| AHYM | Thread Diameter: | 0.250 inches |
| ANEE | Grip Length: | Between 0.615 inches and 0.635 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 28 |
| CQBC | Min. Tensile Strength (psi): | 180000 pounds per square inch |
| CQFM | Hardness Rating: | 39.0 rockwell c and 43.0 rockwell c |
| CRHC | Hole Configuration Style: | Spline |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Qq-p-416 type 2 cl 2 federal specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
