Note : We Will Not Share Your Information To Any Third Parties.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
| NSN | National Stock Number: | 5306-01-278-1989 5306012781989 |
| TXT | Description: | Shear Bolt |
| INC | Item Name Code: | 15903 |
| AAJD | Thread Class: | 3a |
| AAJF | Thread Direction: | Right-hand |
| AASA | Thread Length: | Between 1.085 inches and 1.135 inches |
| AASB | Fastener Length: | Between 2.345 inches and 2.375 inches |
| AASK | Head Style: | Spline extended washer |
| AASU | Head Height: | Between 0.552 inches and 0.572 inches |
| AATC | Extended Washer Diameter: | Between 1.153 inches and 1.163 inches |
| AATD | Extended Washer Thickness: | Between 0.080 inches and 0.100 inches |
| AAUB | Hole Diameter: | Between 0.050 inches and 0.060 inches |
| AAUR | Grip Diameter: | Between 0.6230 inches and 0.6240 inches |
| AAZH | Head Minor Diameter: | Between 0.673 inches and 0.688 inches |
| AHYM | Thread Diameter: | 0.625 inches |
| ANEE | Grip Length: | Between 1.240 inches and 1.260 inches |
| ASXK | Hole Quantity: | 4 |
| BQDM | Hole Type: | Drilled |
| CMLP | Thready Qty Per Inch (tpi): | 18 |
| CQBC | Min. Tensile Strength (psi): | 260000 pounds per square inch |
| CQFM | Hardness Rating: | 51.0 rockwell c and 54.0 rockwell c |
| CRHC | Hole Configuration Style: | Spline |
| CSYM | Surface Finish: | 32.0 microinches bearing surface of head |
| CSYM | Surface Finish: | 32.0 microinches grip |
| MATT | Material: | Steel comp h11 |
| MDCL | Material Specification: | Ams 6487 assn standard single material response |
| SFTT | Surface Treatment: | Cadmium and chromate |
| STDC | Surface Treatment Specification: | Mil-c-8837, type 2, class 2 military specification single treatment response |
| THSD | Thread Series Designator: | Unjf |
We have compiled a network of trusted FAA approved MRO facilities that can get your AR or damaged unit into OH, RP, or SV condition, providing complete paperwork.
View MoreIndustry's fastest RFQ turnaround. Get the answers you need now.
Email Us at
If You Ever Need a Quick and Competitive Quote for Aerospace and Aviation Parts, Simply Fill Out the Instant RFQ form. A Dedicated Sales Representative Will Get Back to You In 15 Minutes Or Less.
Request for Quote
